Description
GATOR DUST BOND is a unique mixture of polymer binders and calibrated stone available in Sahara Beige and Stone Grey. Once GATOR DUST BOND sets, it becomes very firm and locks between the wet cast or natural stone joints while still retaining flexibility and providing a long lasting, durable jointing material. GATOR DUST BOND is recommended for a variety of uses including pool decks, patios, footpaths, and any other pedestrian applications.
Product Features
- For pedestrian use only
- Compatible with all types of wet cast and natural stones
- Does not haze wet cast or natural stones
- Use for joints that are a minimum of 1/2″ (1.25 cm) to a maximum of 6″ (15 cm) wide
- Product works at above 59°F (15°C)
- Rain safe 24 hours after water activation
- Ideal with the application on Gator Base panels foundation
- Waterproof bags: Lay bag flat on its back, so front of the bag is facing you. Intact pallets can be stored outdoors
- 15-Year Limited Warranty
PLEASE NOTE
GATOR DUST BOND becomes very firm but will detach from wet cast or natural stones if the crushed stone base has excessive movement. It will also detach from the wet cast or natural stones if the wet cast or natural stones are oscillating back and forth due to improper installation. By following GATOR DUST BOND installation instructions carefully, you will obtain a very hard jointing material. It should be noted that GATOR DUST BOND will continue to harden over time. Avoid excessive watering or flooding of wet cast or natural stone areas. When installing wet cast or natural stones around an underground pool, a slope of 1/8 inch (3 mm) per linear foot away from the pool is mandatory. All wet cast or natural stone surfaces must have a drainage slope for the GATOR DUST BOND to work at its optimum. For the pool coping blocks, it is mandatory to use mortar in the joints. For the rest of the wet cast or natural stones installation around the pool, you can use GATOR DUST BOND. Do not sweep GATOR DUST BOND over asphalt.
