Description
GATOR SEAL SIGNATURE SERIES FOR NATURAL STONE WITH COLOR ENHANCER is a color enhancer and is made of silicone based polymers. This sealer penetrates deep into the natural stones, therefore helps prevent the oil and dirt penetration, corrosion from de-icing salt and the effects from the UV rays.
Product Features
- Non film-former
- Vibrant color enhancer
- Darkens the color (wet look)
- Apply on dry surface only
- Works at above 40°F (4°C)
- Rain-safe after 24 hours
- Easier to clean and maintain
- For use on salt-water pool patio areas
- Water-based, Zero Gloss
- UV-resistant
- Stain protection
- Helps resist corrosion from de-icing salt, effects from UV rays, motor oil and grease stain
PLEASE NOTE
- Natural stones should only be sealed 60 days after their installation date. Consult natural stone manufacturer’s for their recommendation.
- Natural stones and jointing sand MUST be 100% dry.
- Temperature should be between 50°F (10°C) and 80°F (27°C) when sealer is applied.
- Natural stone surface must be cool to the touch when sealer is applied (ambient temperature between 50°F (10°C) and 80°F (27°C)).
- First clean natural stones with Gator Clean products. Remove all oil, grease and rust stains.
- Use Gator Efflorescence Cleaner to remove any trapped efflorescence. It also thoroughly cleans the surface to ensure a proper sealer adhesion.
- Use just one (1) layer of GATOR SEAL SIGNATURE SERIES FOR NATURAL STONE WITH COLOR ENHANCER.
- When using GATOR SEAL SIGNATURE SERIES FOR NATURAL STONE WITH COLOR ENHANCER, assure yourself at least 48 hours of dry conditions prior to applying the sealer.
- Specifically formulated to be used on unsealed surfaces only. Cannot be used as a resealer
- Wear protective gloves, eye protection and respiratory protection.
- Always keeps surfaces dry and clean to reduce slip-fall accidents. This sealer is not anti-slip. Precautions should be taken around pools and showers.
- Do not let it dry (white film or slippery residue may form). If not wiped dry after 5-10 minutes, residu may form. Do not pressure-wash. Not resistant from acids or caustic chemicals. Do not dilute. Not for food handling surfaces. Not for glazed tile or non-porous surfaces. Apply between 50-80°F (10-27°C). Dry residue after a long period may be removed by adding more sealer or mechanically.
